ProNature Plaster Primer is an Interior and exterior waterborne natural resin-based wall primer. To be used for the pretreatment of very absorbent or unevenly absorbing mineral substrates (plaster, concrete etc.)


Plaster Primer



You may also like…

  • Essentials

    Paint Tray

    R25.00 Add to basket
  • Essentials

    Paint Rollers

    R79.00 Select options
  • Essentials

    Paint Brushes

    R29.00R69.00 Select options
  • Essentials

    Masking Tape

    R25.00R35.00 Select options
  • Clean & Care

    Canvas Dropsheet

    R195.00 Add to basket


Approximately 10m²/litre, depending on absorbency of substrate.

Package Sizes:
1l, 5l, 20l

Dried product residues can be composted or disposed of with domestic waste material. DO NOT empty liquid residues
into drains. Return empty tins for recycling.

Surface Preparation:
Mineral substrates: to ensure correct PH-Level for proper adhesion pre-treat surfaces with acid wash.
Then proceed with filling holes & cracks.
All surfaces must be clean, dust- and oil free.

Product is ready to use. Do not dilute. Stir well.
• The paint can be applied by brush, roller, foam pad or suitable spraying equipment.
• 1 coat of undiluted ProNature Plaster Primer is sufficient under normal circumstances.
• 12-24 hours of drying time before applying ProNature Wall & Ceiling (depending on ambient temperature.)
• Clean tools with water. For partially dried product use ProNature Plant Soap Concentrate.

Clean tools with water. For partially dried product use ProNature Plant Soap Concentrate.

Water, Calcium Carbonate, Kaolin, Linseed Oil, Sunflower Oil, Soybean Oil Ester, Casein, Borates, Gum rosin, Titanium Dioxide, Cellulose Ether, Potassium Sorbate, Isothiazolinone and Butylcarbamate.
TVOC (total volatile organic content) = 0.93 g/litre

Even natural ingredients may cause allergies. Use only as directed. Store out of reach of children. Supervise children during use.

Technical Data Sheet – Plaster Primer

Weight N/A

1 litre, 5 litre, 20 litre