Natural blend of Iron and Vinegar which creates an ebonizing effect on tannin rich timbers like Oak, Teak, Mahogany etc. Timbers without or with little tannin will require a additional treatment before ProNature Ebonizer is applied. (Please refer to page 2 of the technical data sheet: ProNature PreTreatment)

Opus Ebony - Ebonizer



Colours achievable:
Deep black or if used diluted weathered effects.

Further Treatment:
The ebonized surfaces should receive further treatment once dried sufficiently with any of the ProNature products like ProNature Indoor or Outdoor.

Storage/Shelf life:
Store in a cool, dry place. Minimum stability 12 month in closed container.

ProNature Ebonizer can be diluted strongly with water and will then be safe to be discarded through municipal Sewerage ways.

Evenly apply a liberal layer using sponge, brush or short bristle paint roller (Use metal-free tools).
Depending on the timber used a reaction to the ProNature Ebonizer may only be seen after a short period.
Leave to dry thoroughly and if necessary, lightly sand the surface before further treat the timber surface.
A second application with ProNature Ebonizer maybe required if a stronger ebonizing effect is desired.

The ebonized surfaces should receive further treatment / sealer once dried sufficiently with ProNature’s Wood Sealers: ProNature Indoor or Outdoor.

Water, Tannic acid

Product is slightly corrosive and adequate protection i.e. goggles and gloves should be worn when handling the material! Metal-free tools should be used. Protect surfaces not meant to be treated.

Natural ingredients may cause allergies. Use only as directed. Keep out of reach of children. Supervise children during use.

Technical Data Sheet – ProNature Ebonizer

Weight N/A

1 litre, 5 litre