Maximum pigmented black stain and pre-colour for interior and exterior wood. For best results
simply seal it with oil-based ProNature products i.e., Wax Balm, Outdoor, Indoor, Rock.

MAX Black



You may also like…

Product is ready to use. Do not dilute. (However, depending on the type of wood, thinning the first coat by 10%
with ProNature Plant Turpentine may be required.)

  • If surface been previously coated: remove all coating by sanding/paint stripper.
  • Surface must be dry, clean and dust-free. Sand wood to a fine, smooth finish using min grit 100.
  • Stir well!
  • Apply liberally using brush or short bristle paint roller (or wipe with cloth) until saturation is reached.
  • Remove and dry off any excess thoroughly that has not been absorbed after about 10 min using a lint-free
    cloth i.e. ProNature Mutton Cloth.
  • Leave to dry for a minimum of 6 hours and if necessary, lightly sand the surface before applying the next coat.
  • The finish will take about 7 days to fully cure, avoid standing water during this period.

NB: Cold weather and/or high humidity will prolong the drying process.

Use ProNature Plant Turpentine for tools.

Linseed oil, plant oils, essential oils, lead-free driers, pigments of natural occurrence or non-toxic mineral pigments.

Safety: Natural ingredients may cause allergies. Use only as directed. Store out of reach of children. Supervise
Children during use.

Caution: ProNature Colours must not be applied in the same spray booth as nitrocellulose-based laquers or

Technical Data Sheet – ProNature Max Black

Weight N/A

100ml, 500ml, 1 litre