ProNature Indoor 5L
ProNature Indoor Wood Paint will protect your precious wood furniture from water damage with a natural formulation that gives off no harsh, harmful emissions. From the first company of its kind in South Africa, this clear wood paint will seal and prevent damage to your indoor wooden furniture, saving your occasional and kitchen tables from water marks caused by a glass put down with no coaster and accidental spills while giving your surfaces a matte, polished finish. ProNature have created this all natural, sustainable formulation that contains no harmful ingredients such as formaldehyde or aromatic solvents found in ordinary paint.
For the impregnation and protection of all table and kitchen tops and all other working surfaces, which are subject to frequent contact with water or water based materials.
Please Note: We can source larger quantities (5L containers) of this product for you at your request, please be aware that the price will also then be based on delivery charges for large quantities. Contact our Customer Care for ordering.
- Interior wood sealer
- Matte finish
- Water resistant
- Spot repairable
- Easy to apply
- Low maintenance
- Natural, sustainable ingredients
Clean surface and sand wood to a very fine, smooth finish using grit i.e. 180, and preferably finer 220 or higher.
ProNature Indoor is ready to use and needs not be diluted. Depending on the wood type a thinning down of the first coat with about 10 % of ProNature Plant Turpentine may be required. Clean brushes and equipment with ProNature Plant Turpentine.
Stir material well before application. ProNature Indoor is applied liberally using a brush or short bristle paint roller or simply by wiping or dipping. Depending on the absorbency of the wood apply ProNature Indoor until complete saturation is reached using the wet in wet process. Once saturation is reached remove any excess thoroughly using a lint-free cloth or any suitable machinery. Drying time is approximately 24 hrs.
To further improve on the water resistance it is recommended to apply a very thin layer of ProNature Indoor after a drying time of 12 hrs by simply wiping on the material with a lint-free cloth. Remove any excess and leave to dry.
Coverage: Approximately 9 – 14 m²/liter, depending on wood type.
The water resistance of the coating will only be reached after approximately seven days and will further improve with age.
The durability of oiled wooden working surfaces highly depends on regular cleaning and care. For the first two weeks tops should not be subject to standing water. Thereafter the tops can receive normal cleaning with a neutral soap solution and water.
Tops should receive aftercare using ProNature Indoor regular intervals at least three times a year or once the surface appear partially dry and lustreless and in need of nourishment. Apply sparingly and wipe of any excess thoroughly and leave to dry.
ProNature Indoor is spot repairable and should small damages from wear or scratching occur just clean the area thoroughly using ProNature Plant Turpentine where necessary, and sand concerned area lightly with a very fine sandpaper i.e. grit 600 or scouring pad. Remove dust and apply a thin layer of ProNature Indoor with a soft cloth following above instructions. The treated area should not be subject to wet cleaning for 48 hours.
Storage: A minimum of 6 months in unopened containers when stored in a cool and dry place.
Linseed oil, blend of vegetable oils, gum resin, orange peel oil, lead-free driers, natural and non-toxic mineral pigments
Note: Natural products are not odour and emission free. Consider possible allergies
Cold weather and high humidity will retard the drying.
Soaked, used cloths may spontaneously combust, and should be spread open, or kept safely in a tightly sealed tin after use.