A weather resistant blend of plant oils and gum resin for the protection of exterior and interior wood.

Where to use ProNature Outdoor?

Use ProNature Outdoor for the water repellent treatment and protection of all exterior and interior wood, outdoor furnishings, wooden decks and staircases, pergolas, doors and windows etc.

ProNature Outdoor contains no biocides.

Download Technical Data Sheet ProNature Outdoor

Colours Available

Download Colour Chart

Stir material well before application. ProNature Outdoor is applied liberally using a brush or dip application. Where suitable material can also be sprayed. In order to avoid glossy spots and prolonged drying it is necessary to remove any excess that has not been absorbed after about 10 to 15 minutes using a lint-free cloth. Leave to dry for a minimum of 6 hours. A light sanding after drying is recommended if surface appears too rough.

Then apply second coat of ProNature Outdoor. Allow drying for a minimum of 6 hrs. Again a very light sanding is recommended if surface appears tp be too rough before applying the final coat. Only surfaces, which are subject to extreme weather conditions, should receive an additional coating after a 24 hr drying period. For interior use an application of two to three coats is adequate.

Cold weather and high humidity will retard the drying process!!!

Application - previous coated wood

Remove all previous coatings by means of sanding or suitable paint stripper. Sand to a very fine, smooth finish. Any wood defects like deterioration by fungi or insects must be removed and a pre-treatment with a suitable agent may be required. After pre-treatment follow above instructions for untreated wood.

Coverage / Care & Repair
	Approximately 10-14 m2 per litre, depending on wood type. Coverage will be lower if applied to roughly sanded surfaces
	ProNature Outdoor should be applied in regular intervals at least once a year or whenever necessary.